Add: Changjie Industry Park, Ninghai, Ningbo City, Zhejiang Province, China. 315601
What are the common binding methods of Binder Clip?
1. Horseback Binder Clip binding and binding. This is one of the most common binding methods. It is mostly suitable when the number of loose-leaf pages to be bound is small. The processing price will be cheaper, the Binder Clip process will be simpler, and the production speed will be faster. However, when the number of loose pages is large, there will be obvious bulging, and the center of the plate is prone to shifting, and even the upper and lower mouths of the spine are easily damaged.
2. Iron wire Binder Clip flat binding, usually used in the case of a large number of loose pages, and the weight of the book core paper is low. The cost of this kind of binding is relatively low, but the Binder Clip efficiency is relatively high. However, the wire is prone to moisture corrosion, which affects the quality of binding. In addition, if the weight of the paper is too large, it will also affect the reading of the book
3. Binder Clip binding with wireless glue binding. This is one of the most commonly used methods at present. The glue binding can be divided into hot glue, cold glue, and PUR glue. However, it should be noted that after the hot-melt glue is soaked and dried, the book cannot be opened to the end, and there will be about 3mm of the book that cannot be read, so the inner page version The center position is 3mm away from the mouth.
4. Binder Clip binding is a common method for book binding, that is, the pages after collating are connected according to a certain order, and during the connection process, they need to be locked. This binding method can make reading more convenient, the books are firmer, and the service life is enhanced. Some high-quality, hard-covered books use Binder Clip.